The OXIBLU system

In certain parts of the world, the quality of the drinking water supply through the public network can be inconstant and a vector of contamination by bacteria, viruses and other harmful micro-organisms.

Therefore, HSD Water supplies OXIBLU to provide a final disinfection at the end-user’s tap.

In Situ Chlorine Dioxide Generation

Based on the electrolysis principle, OXIBLU is a patented technology, to be either integrated into water coolers or dispensers or used as a stand-alone unit (in this case with its specifically designed electronic controller).

Using only the chlorides ions naturally present in the water (a minimum concentration of only 20 ppm is required), OXIBLU will generate up to 1.2 ppm of Chlorine Dioxide.

Chlorine dioxide is one of the most effective disinfectants rapidly killing bacteria, viruses, fungi and algae.

Its efficacy has been proven at concentrations as low as 0.1 ppm (parts per million) and over a wide pH range. It is also highly soluble (10 times more than chlorine), even in cold water so being much more effective.

Unlike the other forms of chlorine, chlorine dioxide is also efficient against biofilm which can form into pipes, tanks and equipment and be a threat to the drinking water quality.

OXIBLU – an ideal solution for water dispensers

OXIBLU is a state-of-the-art disinfection device which can be easily integrated in water coolers, water dispensers and under the sink faucet systems.

It will provide a final disinfection bringing safety all the way to the tap to which the end-user will get his drinking water from.

In standard, OXIBLU is able to treat up to 2 liters/min (0.53 US Gal./min), a flow rate corresponding to most of the requirements for these equipments.

Examples of applications are:

Water coolers
Water dispensers
Under the Sink Faucet Systems (POE)

OXIBLU 500/1000 – flexible solutions for higher water volumes

BlueSense​™ has also developed units based on OXIBLU electrodes technology that produce up to 1.0 m³/h:
The device is built with 5 to 10 electrodes in parallel and can be adapted to the existing flow rate.  It is easy to install with a very low replacement cost.

OXIBLU 500 : 0.5 m³/h
OXIBLU 1000:  1.0 m³/h

Roof Top Tanks
In-line in (small scale) drinking water networks
Small Cooling Towers (Evapo-condensers)
Animal Drinking Water Lines (poultry, cattle, etc.)

Get in touch

Would you like to learn more about our technology, or share your project with us? We are ready to be of service!